When someone buying a sofa asks me "what density is the foam?", I'm glad. It means they're looking in the right place. But the answer on its own tells you very little. There is 32-density foam, and then there is 32-density foam.
I explain it like this in trade conversations: I've seen 32-density foam collapse in three months, and I've seen 32-density foam that sits like new for years. Same number on the label. The difference lies where the number doesn't reach.
What density measures
Density is the weight of the foam: how many kilograms one cubic metre weighs. What we call "32 density" is foam that weighs 32 kilograms per cubic metre. Measuring it is simple; a piece cut to a known size is weighed and divided by its volume.
The measure is useful. Between two foams made from the same material, the heavier one usually lasts longer, because it contains more load-bearing material. The catch is in "the same material".
Where does the weight come from?
Foam can get its weight from two places: from the foam itself, the polyurethane, or from fillers added during production. Mineral fillers such as calcium carbonate are a well-known way to make foam heavier cheaply.
The Polyurethane Foam Association (PFA), the body of US foam producers, says it plainly: when fillers are used, the total density of the foam comes out higher than the unfilled polymer density; fillers can hurt the foam's performance and durability; and to judge quality, the unfilled density is what you should look at.
So part of a foam labelled 32 may in fact be stone dust. On the scale it weighs 32; when you sit on it, it behaves like a lower-density foam. The harm from filler isn't felt on day one. It shows when the foam recovers after being compressed: the more filler, the slower and less completely the cushion comes back after you stand up. The "dip" you notice a few months later is exactly that.
Firmness is a separate measure
The second confusion is about firmness. Buyers tend to think firm foam is quality foam and soft foam won't last. In fact firmness can be set independently of density: the same density can be made soft or firm.
Firmness is measured by how much force it takes to compress the foam by a given amount. There is an international test method for it (ISO 2439). Durability is measured by a completely different test: the foam is loaded and compressed over and over, and then you look at how much thinner and softer it has become (ISO 3385). This third test says the most about how a sofa will feel years from now, yet nobody mentions it in a showroom.
In short, foam has three separate report cards:
- Density: how heavy it is, meaning how much material is inside.
- Firmness: how it feels when you sit down.
- Fatigue: how much of it is left after thousands of sittings.
Only the first gets talked about in a sale. Because it's the easiest one to say.
Why does the trade talk in a single number?
Habit more than bad intent. Most furniture makers don't produce their own foam; they buy blocks or cut pieces from a foam supplier. And the supplier's invoice usually carries a single piece of information: density. Filler content, firmness values and fatigue test results don't travel down this chain.
Buyers learned the number too. "Is it 32?" — "It's 32" satisfies everyone. For anyone who wants to bring the price down, it's also the quietest route: change what's inside without changing the number.
What to ask when buying a sofa
- What density is it? Keep asking. But treat the answer as a starting point, not the final word.
- Who makes the foam, and does it contain filler? A seller who knows will tell you. If they don't know, there's no information standing behind the product either.
- Is the seat foam the same as the back foam? The seat carries the most load; in good production it's specified separately.
- Will you put it in writing? Instead of a verbal answer, have it written on the order form. If the cushion collapses, that's the document you'll be talking about.
You can also try a small check in the showroom: press firmly into the middle of the cushion with your palm, then lift your hand. Your hand will tell the difference between foam that springs right back and foam that recovers slowly, leaving a mark. It doesn't count as a test, but it's better than not looking at all.
Final word
Density isn't a bad measure; it's an incomplete one. How heavy a foam is doesn't tell you why it's that heavy. The difference between a good sofa and a sofa that only looks good is very often right here, hidden under the fabric.
My advice: ask for the number, but don't settle for the number. Foam from a seller who can't give you the answer in writing probably isn't as solid as that number suggests either. For the trade, it will start with accepting that a single figure doesn't tell the whole story.
Sources: Polyurethane Foam Association, IN•TOUCH bulletins (foam density, fillers and durability); standard definitions of ISO 845 (apparent density), ISO 2439 (indentation hardness) and ISO 3385 (constant-load fatigue — loss of thickness and hardness).